ECO Spot LED30 User Manual
Copyright © 2010 Globus New Media LLC
Page 3
Gobo Replacement
Unplug the power cord and let the projector cool down.
Unscrew the four thumbscrews to remove the front cover with the projection lens.
Push the two pins of the gobo retaining ring together and pull out the retaining
ring.
Carefully remove the old gobo and replace it with the new gobo. You may have to
tilt the projector forward for the gobo to fall out. Use caution, not to break the
gobo, have it fall into your hand.
If you have a glass gobo, place the most reflective side towards the light bulb.
Replace the retaining ring and make sure it evenly pushes the gobo all the way
back.
Replace the front cover and adjust the focus.
