ECO Spot
TM
LED40C User Manual
Copyright © 2015 Sunhope Inc
Page
1
of
4
Thank you for choosing our ECO Spot
TM
LED40C Gobo Projector (SKU:
ES-LED40C). This unit is equipped with a fan cooled 40W High Power LED.
Please read this manual before installing or operating this fixture, follow
the safety precautions listed below and observe all warnings.
Below is a general Gobo Changer description, please see the separate ECO Spot Gobo
Changer Manual for Details.
WARNING! Some models are equipped with a voltage selector switch on the back plate of the
unit. Select the correct Line Voltage with the selector on the back of the unit before Operating.
Package Contents
•
Projector with power cord
•
Test Gobos
•
Integrated Gobo Mounts
•
User Manual
Safety Information
•
This product is not for household use, it presents risks of severe injury or death due to fire and burn
hazards, electric shock, lamp explosion and falls.
•
Place your fixture at a suitable place with good air flow.
•
Keep flammable materials away from the fixture.
•
Minimum distance to flammable material = 1 ft (0.3m).
•
Minimum distance to illuminated surface = 3.3 ft (1.0m).
•
Provide a minimum clearance of 4 in (10cm) around air vents.
•
Use only genuine spare parts for part replacement.
•
Do not look directly into the lamp; it can result in eye damage.
•
Don’t touch the hot surface during operation, use gloves if necessary.
•
Always unplug the unit from the power mains before any service is done.
•
Allow 20 minutes to cool down before servicing the unit.
•
Replace Lamps only with the same type other lamps may cause damage.
•
Light fixtures should be installed and maintained only by qualified personnel with experience in
lighting equipment and general electrical experience.
Electrical Safety
•
Disconnect the fixture from AC power before handling the fixture.
