ECO Spot
TM
LED40C User Manual
Copyright © 2015 Sunhope Inc
Page
3
of
4
Multi-functional Yoke
•
The yoke can slide over the whole length of the fixture body to accommodate multiple pointing
directions.
•
The yoke serves as stand.
•
The yoke can be screwed to a wall or ceiling or fastened with a C-clamp.
Gobo Changer Functionality (see the Gobo Changer Manual for details)
The gobo changer has four gobo slots. A timer continuously switches between the different gobos.
Unless customized (see below), it will go a full sequence ( slot 1,2,3,4,1,2,...). Turn on and off the gobo
changer with the small switch on the back plate.
Interval Timer:
The interval timer can be set by turning the knob on the back plate from continuous up to
approx. 120 seconds changing interval.
Single Gobo:
For showing only a single gobo w/o any changes, simply turn off the changer power switch on
the back plate when the correct gobo shows.
Two or Three Gobos:
For showing 2 or 3 gobos only. The
changer is equipped with four sensor magnets, one for each
gobo slot. For showing only three gobos, remove one
magnet. For two gobos, remove two magnets. Unscrew the
magnet with pliers.
Tip:
Screw the removed magnet back in from the opposite
to keep it for later use.
Static Slot:
The unit has an additional static slot, which can
be used in two ways:
•
Color Overlay
in conjunction with b/w gobos in
the changers Gobo Wheel and a color filter in the Static Slot.
•
Gobo Color Changer
in conjunction a b/w gobo
in the Static Slot and color filters in the changers Gobo
Wheel.
Specifications
Line Voltage
(use the Line Voltage Selector in the back to select the correct line voltage.)
US/Canada Setting:
90-130V, 50-60Hz, 0.4A, 48W
International Setting (220V):
200-240V, 50Hz, 0.4A, 48W
Ambient Operating Temperature
-13 to 104°F (-25 to 40°C)
Gobo Dimensions
Metal or Glass Gobos and Dichroic filters
