16#CNC#STUDIO#USB#USER#MANUAL#
The#“Program”#Window#
The main window of the program is depicted below:
The main window is divided into different sections:
1.
Change program view.
(upper right) These tabs can be used to switch between the displays
“Program,” “Settings” and “Editor.” “Program” is the window that is currently open above. The “Program”
window is used to operate your machine. Click on “Settings” to change the parameters of your machine or
the job process. The “Editor” window allows you to configure your CNC program directly.
2.
Manual drive.
You can also operate your machine manually by clicking on the buttons in this
section. All axes can be moved at speed and the speeds are defined in “Settings.” The Y and X axes can
also be moved simultaneously (diagonally). This is also where the milling spindle and the cooling and
suction equipment can be switched on and off with the mouse.
Toll measure
Moves the tool to the position of the tool length measuring sensor and measures
the tool automatically. The tool length compensation is calculated automatically when a tool is
changed.