CNC#STUDIO#USB#USER#MANUAL#17#
Homing
performs homing of all axes and parks at the machine zero point.
Zero point set
saves any position of the tool as the zero point and sets the coordinates to zero.
Go to zero point
moves to the saved zero point position.
Go to park position
– moves automatically to the saved park position. This position can be used
for the manual tool change, e.g.
Save parking
saves any position of the machine as the park position.
Start
execution of the loaded CNC file.
Pause
pauses the execution of the loaded CNC file.
Stop
interrupts the execution of the loaded CNC file.
3.
Coordinates display.
These buttons are used to control your automatic processes:
4.
Display of the coordinates and progress bar of the CNC program.
The X-Y-Z display shows the
exact position of your tool down to the millimetre. In order for the correct value to be displayed, homing or the
setting of a zero point is required. The display of the A – axis is not enabled in this version.
5.
Working area of your machine.
(centred) The size and proportions of the working area adapt to the
parameters of your machine which you entered in the settings. You can display your job file graphically on this
area, and likewise this area is used for displaying the emulation.
6.
CNC program.
This is where your CNC program is loaded and displayed as a test. You can also have
your milling job file displayed on the working area of the machine (5) or start an emulation. An emulation is
very important and helps you to monitor the sequence of the job steps.
7.
Table view.
Set the scaling factor for the working area of the machine. On larger machines and smaller
workpieces, you can zoom in or out. The working area is always shown in proportion.
8.
Current parameters.
These parameters are defined in “Settings” and displayed here:
Safety distance mm
Shows the distance between the zero point and the tool tip when lifted
Depth
Shows the plunge depth from zero point of the tip of the tool into the workpiece
Repetitions x
Shows how often the program is repeated. With each repetition, the plunge depth is
added anew
Milling speed XY mm/s
the milling speed of the X and Y axis
Immersion Speed Z mm/s
the plunge speed of the Z axis
9.
USB BOX status
– indicates whether the USB Box is connected.