CNC#STUDIO#USB#USER#MANUAL#5#
Technical#Features:#
Easy plug-and-play hardware
The software is very simple and intuitive to use
Only one user interface, no bothersome switching between windows
Operating instructions integrated in software and can be opened with one click of the mouse
Runs on all PCs, notebooks and netbooks with at least 1Ghz output and USB connection
USB 2.0 interface
Machine control via small USB Box
Works with all clocking/direction controller cards
Extremely fine and precise motor control
Interpolated movement of all axes
Activation of maximum 3 axes ( for V1.0)
Import filter for HPGL .PLT files
Integrated high efficiency editor
Manual teach-in with the mouse in exact steps
Graphic progress indicator
Automatic and manual spindle control (on/off)
Manual switching of the cooling or suction equipment using the mouse
Speeds of all axes can be set individually
Ramps for all axes can be set individually
Axis resolution for all axes can be set individually
Thread pitch of the drive spindles can be configured at will
Variable pin assignment of all inputs and outputs
Maximum 23,076 steps per second
Supports tool length sensor
Supports EMERGENCY STOP switch
Supports manual tool change
Current reduction
Current switch-off
Tool length sensor is supported
Automatic zero point homing of the axes
Coordinates display and search of a specified zero point
Software controls the working area
The limit switches can be activated/deactivated individually by the software
Limit switch can be selected as N/O contact or N/C contact
Backlash compensation
All signals can be inverted
All LPT signals can be assigned at will