If the in tray or optional lower tray is empty:
1. Load paper in the tray.
Press the Resume button to continue printing.
Paper problems
• Printer ejects the paper
If you are performing a colour calibration, install both the tri-colour and photo print
cartridges.
If you are printing a borderless document and the Resume light and Print Cartridge
Status light are flashing, follow the guidelines below.
Print quality is poor
• streaks and missing lines
If your printed pages are missing lines or dots or if streaks appear, the print
cartridges may be low on ink or may need to be cleaned
.
• Print is faded
Verify that a black print cartridge is installed.
If the black text and images on your printouts are faded, you may be printing using
only the tri-colour print cartridge. Insert a black print cartridge, in addition to the tri-
colour print cartridge, for optimal black print quality.
Verify that neither of the print cartridges is low on ink.
If a print cartridge is low on ink, consider replacing the print cartridge.
Verify that the protective piece of plastic tape has been removed from the print
cartridges.
Consider selecting a higher print quality.
• Blank pages print
The protective piece of plastic tape may still be attached to the print cartridges.
Verify that the plastic tape has been removed from the print cartridges.
The print cartridges may be out of ink. Replace one or both empty print cartridges.
• Too much or too little ink appears on the page
Adjust the ink volume and dry time:
1. Open the printer properties dialog box.
2. Select the PAPIERART/QUALITÄT control field
3. Click on the Ink
4. Move the Ink Volume slider toward Light or Heavy.
5. Click on Printing
15
