3-4. Self-Test
The Self-Test function will help user to check whether the printer is operating normally. The
printer will go back to standby mode after printing a Self-Test page. Below are the Self-Test
procedures:
1.
Power off the printer, press and hold the FEED key.
2.
Power on the printer while still holding the FEED key until the printer beeps 3 times and the
LCD Display would show “Self Test”, and then release the FEED key.
3.
After about 1 second, printer would automatically print out a Self-Test page as follow. This
means the printer is working properly.
EZXXXX : VX.XXX
Serial port :96,N,8,1
int-usb sw setting: ext-USB
1 DRAM installed
Image buffer size : 1500K
000 FORM(S) IN MEMORY
000 GRAPHIC (S) IN MEMORY
000 FONT(S) IN MEMORY
000 ASIAN FONT(S) IN MEMORY
000 DATABASE(S) IN MEMORY
000 TTF(S) IN MEMORY
2048K BYTES FREE MEMORY
^S4 ^H19 ^R000 ~R200
^W100 ^Q100,3
Option : ^D0 ^O0 ^AD
See-through Volt: 4.8 3.7 2.4(2.3)
Code Page: 850
Model & Version
Serial port setup
USB port setting
Test pattern
Number of DRAM installed
Image buffer size
Number of forms
Number of graphics
Number of fonts
Number of Asian fonts
Number of Databases
Number of Scalable fonts
Free memory size
Speed, Density, Ref. Point, Print direction
Label width, Form length
Cutter, Stripper, Mode
Sensor Setting
Code Page
Self-Test includes the internal printer data setting.
EZPi-1000 User’s Manual
24
