background image

    Max tilt angle on the supporting face : 1°.
    Installing machine on an unstable
    location can create noise as machine may vibrate. 
    This can be dangerous since vibrations may
    cause the machine to move.
Keep a distance of at least 10cm between the sides
and rear of your machine to the nearest wall.
Do not place your machine in an area with high 
humidity or direct exposure to sunlight or rain.

This can
Result in insulation damage
Cause deformation or discolouration of the plastic 
parts

To check whether your machine is in level open the lid 
of machine, pour water into the tub up to the level just 
above pulsator and check if the water level matches 
with steel drum holes along the periphery. 
     

Trolley is not recommended. 

     If a trolley is used it should be a metallic
     trolley with four adjustable legs and
     with proper locking to avoid movement
     during function of machine.

Removal of packaging materials

Please ensure all packaging / bottom cushion to be 

removed from the machine before starting machine.

CAUTION:

 Operating the machine with the 

packaging may cause movement/unbalanced 
condition and can damage the machine parts.

MACHINE NOT LEVEL

MACHINE LEVEL

Allow 10 cm

Summary of Contents for WTEON 700 A 5.0

































Reviews: