helpful user tips
Clearing a Jam
If paper is not inserted properly into the shredder, or if the sheet capacity is exceeded,
a jam may result. Move the switch to the REVERSE (<<) position, and remove the excess
paper from the top and pull it out. TO PREVENT ANY INJURIES, DO NOT PLACE YOUR
HANDS NEAR THE FEED OPENING. Once the paper is cleared, normal shredding operation
can resume. If the shredder jams while in reverse, press the switch to the AUTO position
and let shredder run to clear the jammed paper. If jam does not clear, slide the switch back
and forth between the REV and AUTO until the jam is cleared. If the jam cannot be cleared
following this procedure, unplug the unit and carefully remove the jammed paper manually.
Overheating
If your shredder overheats, the unit will automatically shut off and all functions will cease
in order to protect the motor. Turn off and unplug the shredder from the outlet. Allow
enough time for the motor to cool down. The shredder will not resume normal function
until the temperature of the motor cools down to a safe temperature. Once cool, plug the
shredder back into the outlet, turn the unit back on and resume normal operation. Make
sure to empty waste basket to avoid overloading the basket and damaging the
cutting mechanism.
Bin Full Function
Some shredders are equipped with a mechanical or optical Bin Full sensor. When the
basket becomes full, the shredder will cease operation. Empty basket to resume operation.
Emptying Basket
Always turn the shredder off and unplug the power cord from the AC outlet before
cleaning it, moving it, or emptying the wastebasket. Always keep wastebasket emptied so
that the shredder’s output is not impeded. Never let the wastebasket get full. This will
lead to shredded material being pulled back up into the shredder and cause jams.
Staples and Paperclips
This shredder will safely shred standard staples and small paperclips. Industrial or non-
standard, large size staples, jumbo and/or butterfly paperclips, and binder clips should
NEVER be shredded. Please remove from paper before shredding.
user
tips
