4 Software
G PCIe 6281
20
4.5 Reset the Device
The
Series 62
Multibus Controller starts automatically when the power is turned on.
During operation, a software reset of the device may be performed via the API to reset the configurations to their
default values. Each interface can be initialized individually or all interfaces together. To initialize an interface,
the command
G_Common_InitInterface
can be used. With
G_Common_SoftwareReset
all interfaces
are reset. The reset is also possible with the
HardwareExplorer
. To do this, right-click on the desired device (for
resetting all interfaces) in the
HardwareExplorer
or on a single interface and select "Reset".