5
Hardware Installation
Important:
If the source DP output doesn't
support DP 1.2, the Multiple Stream Transport
function will be disabled and this hub becomes
a Splitter, mirroring your video source across all
displays.
1.
Power off all devices you plan to connect to
the unit.
2.
Connect the unit to your PC's DisplayPort
connector.
3.
Connect your HDMI monitors to the unit's
HDMI Outputs
with HDMI cables (not
included).
4.
Connect the unit's
Power Jack
to PC's USB
port for power source with the included
Micro-USB power cable.
5.
Power on all of the connected devices.
6.
It is ready for use.
