4
Product Layout
Figure 1: Transmitter (TX) - Back Panel
1
Power Jack
: Connect the included 12VDC/2A power
adapter here
2
EDID
: The HDMI source device reads EDID
information from the TX unit, and outputs it to the
RXs. Please refer to the setting below.
3
IR Out
: Infrared 3.5mm socket. Plug IR Blaster
Extension Cable here. See instruction on page 7.
4
HDMI In
: Connect your HDMI source here with an
HDMI cable (cable not included)
5
HDMI Out
: Connect your HDMI display here for
local monitoring of the HDMI displays
6
RJ45 Out:
Link to Receiver's RJ45 In using a Cat5e/
6 cable
*Default setting
