10
MAINTENANCE
1. Centering the Walking Belt.
If the Walking Belt tracks off center to the right or left of
the deck, first turn the power off. Then use a wrench to
tighten the rear roller bolt on the side of the treadmill
toward which the belt is moving. For example, if the
belt moves to the left and the deck becomes exposed
on the right, tighten the bolt on the left side of the
frame. Tighten about 1/4 of turn (clockwise).
If the belt does not move back to the center of the
treadmill, make another adjustment to the same bolt.
Once the Walking Belt has been adjusted closer to the
center, the treadmill can be started again.
•
Make sure the walking belt is going on right without
any tracks off the centers
2. It is recommended that the deck be lubricated every
6-12 months according to the frequency of usage.
First, use wrench to loosen the bolts in the end caps.
Pull up the Walking Belt, dispense the lubricant on the
deck, and spread evenly. After lubricating the deck,
center the belt, and check the belt tension.
(If the belt happens to slip, follow the above steps and
lubricate the running deck.)
SUGGESTED PREVENTIVE MAINTENANCE SCHEDULE IN
ACCORDANCE WITH THE AVERAGE RUNNING SPEED
Measurement
Speed
Interval
Metric
6KM/hr
below
1 year
6~12KM/hr
6 months
12KM/hr
above
3 months
English
4mile/hr
below
1 year
4~8mile/hr
6 months
8mile/hr
above
3 months
Note: This preventive maintenance
schedule is only meant for home use.
Summary of Contents for GFTMP01
