background image

GF-DIO MANUAL

 

2012 

 

 

 

Thank you, for purchasing the

 GF-DIO Digital (Input/Output) Board

!  i

f you have any 

question or problems setting up you board you can contact our Tech Support at 

techsupport@goflightinc.com

  or Call 503-895-7020   

 

Be sure to check out the Accessories page on our website where additional cables and 
switches can be purchased in bundled packages. 
 
Current and Future supported software: 
 

iFly 737NG (in progress) 

 

PMDG 737NGX (in progress) 

 

Prosim737 (complete) 

 
 

GF-DIO Board Virtual Pilot Operating Handbook

 

 

GF-DIO Warranty 

This product is warranted to the original purchaser to be free from defects in materials and workmanship for a period 
of one (1) year from the date of purchase. During this warranty period, GoFlight Technologies, Inc. ® (“GoFlight”) will, 
at its option, repair or replace, at no charge, any component determined to be defective. The liability under this 
warranty is limited to the repair and/or replacement of the defect or defective part, and does not include shipping 
expenses. This warranty does not apply if, in the determination of GoFlight, this product has been damaged by 
accident, abuse, improper usage, or as a result of service or modification by anyone other than GoFlight. 
 
NO OTHER WARRANTIES ARE EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED 
WARRANTIES OF SALABILITY AND FITNESS FOR A PARTICULAR PURPOSE. GOFLIGHT TECHNOLOGIES, 
INC. IS NOT RESPONSIBLE FOR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW EXCLUSION 
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR 
EXCLUSION MAY NOT APPLY TO YOU. 
 
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. 

                                                                     
 
 
 
 
 
 
 
 
 
 
 
 

GoFlight Technologies, Inc. 

163 SW Freeman Ave. Suite D, Hillsboro, Oregon, USA 97123 

Phone: 1-503-895-0242 

www.goflightinc.com 

P/N GF-DIO Board Revision 1.0 16Aug2012 
Copyright © 2010 GoFlight Technologies, Inc. All rights reserved.

 

 

 

Summary of Contents for GF-DIO







Reviews: