14
2
Power on
transmitter.
If the left stick is not fully
down, the transmitter will
display an alert message.
3
Connect battery.
Insert battery underneath the frame.
Make sure the cable on the battery is closer to
the yellow connector on the FlyBot.
Connect battery and hold the
Safety Switch.
You will hear two musical tones - one
for the autopilot check and another for
the motor controllers.
Place Easy Drone at the launch point
with the side with the lights facing
towards you and remember that the motors form
a square that should inform the orientation.
If you are using a ground station to navigate, select Connect.
For Mission Planner or APM Planner, select COM or USB and
set the rate to 57600 before connecting. To learn about
using a ground station in flight, visit www.easyaerial.com.
!
Ensure the transmitter is always
turned on while Easy Drone
is powered. If communication
with the transmitter is lost,
it will initiate an automatic
recovery landing.