8
2 . Charge through solar panel (18V,
≥
100W recommended)
1.
Place your solar panel where it will get as much strong direct sunlight as possible.
2.
Connect the output port of the solar panel with the input port of the product to
start charging. When the Battery Indicator Arc on the LCD screen blinks, the product
is being normally charged; when the Battery Indicator Arc is fully lighted on and
stops flashing, and the battery percentage shows 100%, the product is being fully
charged.
※
Note :
When the sunlight is not strong enough to support continuous input
charging, please press the USB power switch to trigger the system.
※
Note :
Actual charging efficiency can vary widely depending on weather ,
temperature , battery state of charge , and other factors.
3. Charge through the cigarette lighter receptacle of your 12V -15V car
Using the car charger, plug the product into the 12V -15V cigarette lighter receptacle
of your car. When the battery indicator arc on the LCD screen is flashing, you will
know the product is charging . When the battery indicator arc on the screen is fully
lighted on and stops flashing, with battery percentage shows 100%, the product is
fully charge .
Summary of Contents for UA1100
Page 1: ...1 Portable Solar Power Station User Manual ...
Page 16: ...16 ...