Gogen WCH 01 C, Installation Manual

EN - 8

Thank you for buying our new product. Before the first use of the device, please, read carefully 

this manual for your safety. We would like to ask you to read all the warnings before using it.

WARNING: 

IF YOU USE A PACEMAKER OR A SIMILAR MEDICAL DEVICE, 

CONSULT THE USE OF THIS PRODUCT WITH A DOCTOR. Always keep a 

pacemaker more than 22 cm from the wireless charger. Electromagnetic waves of the 

charger could interfere the pacemaker.

WARNING:

 Do not use this product near water, in wet areas to avoid fire or injury of 

electric current. Always turn off the product when you don’t use it or before a revision. 

There aren’t any parts in this appliance which are reparable by consumer. Always 

appeal to a qualified authorized service. The product is under a dangerous tention.

In order to protect persons against injury and damage to property we further give explanation 

what you should observe:

•  Do not immerse the device in water or another liquid. The charger must not get wet.

•  Do not handle with the charging adapter if your hands are wet.

•  Do not expose the charger to a direct sunshine long.

•  Do not use or keep the charger in places exposed to high humidity or dustiness.

•  Remove regularly dust from the supply adapter.

•  When charging do not leave the charger or charged device covered with fabric.

•  Do not use supply adapter if it is mechanically damaged.

•  Do not use a damaged cable or a cable with the connector, which is not hold firmly in the 

charger.

•  Do not use the travel adapters (for foreign wall outlets) for charging adapter (for foreign coun

-

tries´ wall outlets).

•  If you do not use the charger, do not keep the supply adapter in the wall outlet.

•  Do not keep the charger in the places, where it can fall down easily. Please, charge on stable 

horizontal surfaces.

•  Before using this device give training according to the manual to children and young persons.

•  Use the charger at temperatures -10°C to 40°C.

ACCESSORIES

USB cable

DEVICE LAYOUT

CHARGING

1) Connect USB cable to wireless charger.

Note:

 Please, make sure that the feeder cable is firmly connected to the charger.

Wireless charging area

Micro USB input

Blue LED – Charging

Cyan LED – Fully charged