SCOPE OF APPLICATION
Evolution LT is a battery-powered sprayer that ensures
OPTIMAL AND SAFE SPRAYING
for your vegetables or garden.
Enables to easily select the most suitable work mode for each type of application.
To achieve this, this equipment is sized with
a pump and a battery, which enables the
alternation between the 2 standard nozzles
to adjust the spray pattern.
Adjustable conical nozzle, suitable for
insecticide and fungicide treatments, in
which fi ne drops with good coverage are
required, and a low-drift nozzle, suitable for
herbicide treatments with thicker drops, in
order to avoid drift.
The
GOIZPER ACCESSORIES
enables the operator to tailor the equipment to each type of treatment [1.b]. For more
information, see www.goizper.com.
This sprayer has been designed so as to apply phytosantiary products (fungicides, herbicides and insecticides) approved by
the authorities which regulate these types of products for use with sprayers. Under no circumstances whatsoever should the
apparatus be used for spraying fl ammable and industrial products (solvents, acids, alkalis, etc.).
It is important that this manual is read and understood prior to starting to use the equipment.
Pay special attention to equipment cleaning and maintenance tips so as to ensure an extended
service life of the sprayer.
Similarly pay special attention to safety regulations. Failure to follow the instructions and safety
warnings may result in serious injury.
The following symbol helps the operator to recognise the situations which when not followed
may create the issues as described below.
ASSEMBLY AND START UP
•
ASSEMBLY:
For assembly follow the instructions given in the photos in Section [2.a].
•
VERIFICATION:
Verify with water that the equipment has been assembled correctly, that it is not damaged and is in good
working condition.
•
START-UP:
For starting up follow the instructions given in the photos in Section [2.b].
•
BATTERY:
Before each working day, ensure that the battery is charged. To charge the battery, see Section
6. Battery.
When installing the battery in the equipment, ensure that it is securely locked. [2.8]
•
CHEMICAL PRODUCT:
For diffi cult to dilute products, it is recommended to prepare the mixture beforehand in a separate
container.
•
SELECTING THE WORK POSITION:
Select the most suitable nozzle for your application according to Tables T.1 and T.2.
[2.10]
EQUIPMENT PERFORMANCE MAY BE REDUCED IF A NOZZLE IS USED WHICH HAS NOT BEEN RECOMMENDED
IN TABLES T.1 AND T.2.
•
TURNING THE EQUIPMENT OFF:
The equipment is fi tted with a pressure switch which stops the motor when the handle
is released, but the equipment is still turned on. To completely turn the equipment off, set the switch to the OFF position
according to the photo [2.12].
TO EXTEND THE EQUIPMENT’S SERVICE LIFE, AT THE END OF THE WORKING DAY, TURN THE MAIN SWITCH OFF,
ACTIVATE THE HANDLE TO RELEASE THE PRESSURE FROM THE HYDRAULIC CIRCUIT [2.12] AND REMOVE THE
BATTERY FROM THE EQUIPMENT.
1
2
EN
-ON
-OFF
INSECTICIDE / FUNGICIDE
HERBICIDE
80º
0,65 l/min
0,17 GPM (US)
80º
0,75 l/min
0,20 GPM (US)
VC C
M F
VC C
M F
Droplet size: VC:
Very thick;
C:
thick;
M:
medium;
F:
fi ne
