737 MAX Flight Crew Operations Manual
Flight Instruments, Displays -
MAX Display System – Navigation
Displays
MN-FLT-OH-201
10.40.11
SYMBOL
NAME
MODE
REMARKS
Off route
waypoint (C)
MAP,
MAP CTR,
PLN
When the EFIS control panel
WPT map switch is selected
on, waypoints not on the
selected route are displayed,
for ranges of 5, 10, 20, or 40
NM.
Flight plan route:
active (M),
modified (W),
inactive (C),
offset (M)
MAP,
MAP CTR,
PLN
The active route is displayed
with a continuous line (M)
between waypoints.
Active route modifications
are displayed with short
dashes (W) between
waypoints.
Inactive routes are displayed
with long dashes between
waypoints.
An offset route, selected
through the FMC, is
displayed with a dot–dash
line (M) parallel to the active
route.
Route data:
active (M),
inactive (W)
MAP,
MAP CTR,
PLN
When the EFIS control panel
DATA switch is selected on,
entered or procedural altitude
and ETAs for route waypoints
are displayed.
Holding pattern:
active (M),
modified (W),
inactive (C)
MAP,
MAP CTR,
PLN
A holding pattern appears
when in the flight plan.
The holding pattern appears
as a fixed size if the selected
range is greater than 80 NM.
A scaled representation of the
holding pattern is displayed
when the selected range is 80
NM or less and the airplane is
within 3 minutes of the
holding fix.
MLF
PARBY
KILMR
AMBOY
12000
KILMR
0835Z
March 1, 2021
