737 MAX Flight Crew Operations Manual
Flight Management, Navigation -
FMC Preflight
11.40.20
MN-FLT-OH-201
2
Performance Initialization (PERF INIT)
Push – displays PERF INIT page.
Displayed only on the ground when required entries on the PERF INIT page are
incomplete.
3
TAKEOFF
Push – displays TAKEOFF REF page 1/2.
Displayed only on the ground when all required entries on the PERF INIT page
are complete.
4
OFFSET
Push – displays LATERAL OFFSET page.
Displayed only in flight.
5
Route Copy (RTE COPY)
Push – results in the active route being copied into the alternate route, regardless
of scratchpad contents.
After selection of the RTE COPY> prompt, COMPLETE is displayed in the data
field in large font and RTE COPY is displayed in the header field in small font.
RTE COPY in the header and COMPLETE is cleared upon re-entering the RTE
Page and the DIR/INTC RTE LEGS page on both CDUs, execution/ERASE of a
flight plan, or the other flight plan entering a pending activation state.
6
PURGE
PURGE> is displayed in the data line in large font when the route displayed is
inactive and a flight plan uplink load pending condition exists. If an inactive route
becomes active, the purge prompt is removed from the new active route and is
displayed on the new inactive route.
Push–results in the clearing of the route uplink, regardless of scratchpad contents.
March 1, 2021
