23
NOTE: NO password required for camera/NVR in default. You can jump to page-11
to change camera’s
password.
NOTE: If
you want to access the camera over internet, choose cloudID in “Login Type”
6. Once the software has connecte
d the camera successfully, the “Status” will change to
“connected”
Optional 1: How to add the cameras to CMS5 outside of LAN
.
1.
Click “Manual Add” button at the lower right corner. A new dialog appear.
2. Name the camera, choose the login type.
NOTE: if you didn’t configure the port forwarding in your router, you properly need to choose the cloudID in
login type.
3. Key in Static IP or cloudID
NOTE: You can mark down the cloudID when you connect the camera in the LAN
4.
Key in password, and click “OK” to save.
