2
FEATURES
With your Metal Detector, you can hunt for coins, relics, jewelry, gold, and silver just about
anywhere. This metal detector is versatile and easy to use.
The detector’s features include:
Two Operation Modes: ALL METAL, DISC
ALL METAL—lets you search for all kinds of metal with auto ground balance and high
sensitivity. It’s the best operation mode.
DISC—discriminates what kind of metal being detected.
Volume—to adjust the volume level of speaker and headphone
Earphone Jack – lets you connect stereo earphones (not supplied) to the detector in private.
View meter and Pointer – The meter pointer swings to the right if metal is found.
Water proof Search Coil – lets you search for metal objects under shallow water.
Note: The search coil is waterproof, but the control housing is not waterproof.
Adjustable Stem – lets you adjust the detector’s length for comfortable use.
Note: Your metal detector requires two 9V alkaline batteries (not supplied).
PREPARATION
ASSEMBLING THE DETECTOR
Assembling the detector is easy and requires no special tools. Just follow these steps.
1. Unscrew the knobs on the search coil and remove the knobs and
the connector. Insert the smaller stem and align the holes on the
search coil bracket and the stem. Push the connector through the
holes, then replace and tighten the knobs.
2. Loosen the stem’s (connected with the handle) lock nut in the direction of the arrow. Then
insert the smaller stem into the big stem connected with the handle. Turn the stem’s lock nut
in the reverse direction of the arrow to lock it in place.
3. Insert the latch on the top of the handle into the assembly hole on
the bottom of the control box. Then slightly push the control box in the
Lock nut
