Printed in China.
3
2 PACK DRONES & FLAG DRONE RACER SET
Replacing Propellers
1. Follow diagram.
2. Remove screw from top of Propeller.
3. Remove broken Propeller and replace with
new Propeller.
4. Make sure you installed the correct blade.
Each blade has a number written on it. Match
the blades with the corresponding number on
the drone
5. Insert screw into top of Propeller
NOTE: Blade 1 turns counter clockwise and
Blade 2 turns clockwise
Connect the Charge
Cable to the Drone
CHARGING BATTERY
Note: The Battery Charger will light up when it is
charging the battery and turn off when the
battery is fully charged. Charge time is
approximately 100 minutes.
1. Turn off the drone before charging.
2. Connect the Battery Charger Cable to the
port found on the rear of the drone
3. Connect USB connector to the power source.
Insert the
Charge Cable
into a power
source
