background image

6

Printed in China.

2 PACK DRONES & FLAG DRONE RACER SET

OPERATING DRONE (Cont.)

Step 7 – Landing Drone

•  Make sure you have achieved level, balanced flight, where the drone is neither climbing nor 

descending.  This mode allows you to safely and slowly land your drone without having to control 

the speed.

•  The ideal auto landing height is 25-30ft.

•  Press the land button to trigger auto land.  Remote will beep continuously until you exit the auto 

land mode.

•  To steer the drone during landing, use the right control until drone has reached the ground.

•  Press the land button again to exit auto landing mode.

NOTE: Please make sure the throttle joystick is on down position before exit auto landing 

mode.

Step 8 – Retrieving Drone

1. Turn off your remote by pressing the Power Button. This will stop you from accidentally turning 

the propellers on.

2. Make sure the propellers have stopped spinning then pick up your drone. 

Note: You will need to pair your drone again before your next flight.

Auto Orientation Button

•  Auto Orientation default setting is off. To enter this mode press Auto Orientation button. Remote 

will beep twice.

•  After drone success paired, the 2 white LED lights toward orientation will be the original forward 

orientation, when drone is in auto orientation mode, whatever the drone spin, the forwar 

dorientation will be previous original forward orientation.

•  Remote will beep every 6s to indicate the drone is in Auto Orientation mode.

•  To exit mode, press the button. Remote will sound 1 long beep indicating that it has exited Auto 

Orientation mode. 

Tips

•  Do not crash drone into sand or dirt. Drone gears may become clogged

•  When first learning to fly, practice lifting off and hovering 

•  Stay several feet from walls and buildings.

Summary of Contents for JG2017B24GT










Reviews: