Heated Portion Pack Display Case
M
ODELS
#5580BV4
AND
#5587
1
INSTALLATION
Your new WARMER is shipped completely assembled, ready to operate.
NOTE:
This model is for
portion pack cheese and prepackaged potentially non-hazardous food only.
After removing the corrugated carton from the machine, check thoroughly for any damage which
may have occurred in transit. Claims should be filed immediately with the transpiration company.
Remove all cardboard packing and tape from the machine. Wipe all exposed surfaces with a
damp cloth to remove fingerprints, smears etc. which may have occurred during unpacking and
handling.
ELECTRICAL REQUIREMENTS
Standard voltage for the warmer is 120 Volt, 60 cycle, single phase A.C. current. The switch to
turn the unit ON / OFF is located under the door.
CARE AND CLEANING
The aluminum frame of the warmer is easy to keep clean. Usually a damp cloth will remove all dirt
and grease spots. NEVER USE ABRASIVES on the aluminum framework. The glass should
always be clean and sparkling. Remember the inside of the glass must be cleaned too. Empty out
all product and remove shelves periodically, and clean inside of the machine. A damp cloth will
usually pick up any debris.
a
