Fence Grills
Model No. 8160, 8161, and 8162 Series
Page 6
gmpopcorn.com
OPERATING INSTRUCTIONS
Controls and Their Functions
ON/OFF POWER SWITCH
Provides power to the Motor and the Heat Control(s). Switch has a built in pilot light to
indicate that there is power to the unit.
HEAT CONTROLS
Models 8160F and 8161F have two Heat Controls which cover the upper and lower zones;
Model 8162 has one Heat Control. These controls have a positive OFF and are variable
from low to high.
Operating Instructions
1.
Be sure grill surface is clean, and fence is placed on grill and aligned with pins.
2.
Turn the Power Switch ON.
3.
Turn Heat Control(s) fully clock-wise to “High” position.
4.
Pre-heat the grill for 15 minutes.
5.
Place pre-cooked product on grill between the fence rails.
6.
Cook for 20-30 minutes and check product temperature with cooking thermometer
(should be 150 Degrees F). Adjust heat as necessary to raise the temperature of the
food to 150 Degrees Fahrenheit.
7.
Carefully remove and serve product.
ON/OFF Power Switch
Heat Control for
Upper Zone
Heat Control for
Lower Zone
NOTE: Model 8162 only has
one Heat Control.
