Econo 8 Popcorn Machine
Model No.: 2388, 2388-00-002
Page 5
gmpopcorn.com
Setup
This unit has been tested at the factory.
1.
Remove all packaging and tape prior to operation. Remove accessories and carefully
remove kettle packed in cabinet interior.
2.
Place unit on a sturdy, level base.
3.
Unit has 4 glide feet preinstalled at the factory (see image below). Install a Black
Crutch Tip on each foot. Firmly push crutch tip over glide until it covers glide entirely.
4.
Tilt kettle and insert into hanger arms, then allow kettle to return naturally to an
upright position (see image below).
5.
Plug kettle lead into receptacle located on ceiling of cabinet interior. Align keyed or
hook shaped prong with the correct opening, then push plug all the way in and twist
or rotate to lock in place. To unplug, untwist kettle plug before attempting to pull from
receptacle.
6.
Door knobs are shipped in accessories pack. Install a door knob with tee bolt on each
popper door; install knob with screw on old maid pan.
7.
After setup, unit should be cleaned prior to use (see Care and Cleaning section).
Black
Crutch
Tip
Glide
(pre‐installed
at the factory)
General
images
shown
for
reference
only.
Kettle
shown
mounted
in
hanger
arms.
Kettle
lead
shown
plugged
into
kettle
receptacle.
