MACHO POP
4
MODELS: 2553EX & 2554EX
Operating Instructions – Controls and Their Functions
Oil System Master Switch (2553EX Only):
Sends power to the oil pump, either the Bucket Pump or Bag-in-a-Box models. The
warmer/blower on the oil pump is activated. The warmer/blower on the oil pump will keep
coconut popping oil liquid if the doors on the base are kept closed. It may be desirable to
keep this switch on at night, if you have problems keeping the coconut oil liquid. Coconut oil
will congeal at temperatures below approximately 76º F [24º C].
“Red” Oil Dispense Momentary Switch (2553EX Only):
When pushed, will dispense the predetermined amount of oil into the kettle. See page 5 of
this manual for oil setting instructions.
Light & Warmer Switch:
This switch operates the interior light, the lighted sign, and the corn deck freshener
heat elements.
Kettle Motor Switch:
This switch operates the popcorn agitator shaft. This switch must be ON at all times
when popcorn (popped and un-popped) exist in the kettle. This switch also activates
the exhaust fan.
Kettle Heat Switch:
This switch turns on the heat element located in the popcorn kettle by sending power
to the “Big Eye” – electronic control system.
Yellow Light & Audible Signal (LOAD – DUMP) :
The Macho Pop is equipped with the state-of-the-art
“Big Eye”
electronic control that
“watches your popcorn machine” to deliver optimum popping performance.
The
“Big Eye”
control will signal the operator to:
1. Load the corn and oil
or
2. Dump the popped corn from the kettle
or
3. Turn off the kettle heat switch if they are done popping corn
Amount of Popcorn and Oil:
The
Macho Pop
is equipped with a 16 ounce corn measure cup. Gold Medal
Products Company recommends the use of flavored and colored coconut oil.
Coconut oil does not leave black deposits in the kettle like other oils.
Corn Charge:
16 Oz. (355 ml)
(Use the supplied corn measure cup.)
Oil Charge:
4-5 Oz.
Flavacol (Salt):
4 Tablespoons (11 cc. – Use the supplied salt scoop.)
a