Pretzel Display Case
4
MODEL #2049, #2049EX, #2050, #2051
INSTALLATION INSTRUCTIONS
CHECKING SHIPMENT
Unpack all cartons and check thoroughly for any damage which may have occurred during
transit. Damage claims should be filed immediately with the transportation company.
Setup
Your new Pretzel Display Case is completely assembled and tested at the
factory. Place the provided 65 Watt flood bulbs in the top interior of the Pretzel
Display Case. Remove all packing material and tape before starting operation.
ELECTRICAL REQUIREMENTS
#2049, #2050, #2051
120 VAC, 1.3 A
#2049EX
230 VAC, 0.7A
Note: The Pretzel Display Case is shipped with two recommended 65 Watt flood bulbs.
DO
NOT
use a bulb above the max allotment of 75 Watts as this can cause damage to the
Pretzel Display Case and will void your warranty.
It is Gold Medal Products Company’s recommendation that this machine be plugged directly into
a wall outlet. The use of extension cords is not recommended due to safety concerns, and may
cause sacrificed and/or reduced performance
.