Sterno Hot Dog Cart
Model No. 8080S
Page 9
gmpopcorn.com
OPERATING INSTRUCTIONS
Operating Instructions
This unit uses Sterno to heat the unit, follow all instructions and review all warnings on product
prior to use.
1.
Remove steamer pans/lids.
2.
Pour distilled water into the bottom of the heating compartment – to a height of
approximately 3/4” (about 3 quarts or 2.8 liters).
3.
Re-install pans/lids (water should just touch the bottom of the insert pans.)
4.
Preheat unit. (Water temperature should be at least 180°F). Start with 5 cans of Sterno
(on Sterno Support). Extinguish cans as needed to hold proper temperature. For best
results, use “pink” Sterno.
5.
Place food product in the pans and allow them to heat on high until internal
temperature is at least 150°F.
6.
Adjust temperature (add or extinguish cans as needed) to hold product at 150°F
serving temperature. Keep the lids in place to help maintain the temperature.
7.
When finished operating, extinguish cans and allow water to cool, then empty the
heating compartment by removing pans and carefully dumping water.
DO NOT
drain
unit while water is hot.
Sterno Support
