Tornado SHO
Model No. 3007, 3007A, 3007EX
Page 9
gmpopcorn.com
MACHINE OPERATION
Settings Test
CAUTION
Floss head operates at high speeds. Operator MUST keep
hands and face clear of the floss head to avoid possible
injury. Keep all spectators at a reasonable distance, and
use a Floss Bubble for added customer protection.
1.
Follow the guidelines described in the Electrical Requirements Section for supplying
power to machine.
2.
With main switch still off, fill floss head. Always fill it 90% full with sugar. This 90%
level is necessary to obtain a balanced condition in the floss head.
DO NOT OVERFILL!
Excessive vibration will occur if overfilled. Before turning the power on, manually turn
the head to balance out the sugar. This will eliminate excessive vibration of the head.
Important: NEVER add sugar when motor is running.
3.
Turn the Main Switch and Heat Switch “ON”.
4.
Turn the Heat Control Knob clockwise to maximum setting to initiate the fastest
possible warm up.
5.
The machine should start making floss in a few seconds. When the unit starts making
floss, you must reduce the heat setting. Turn the Heat Control Knob counter clockwise
to eliminate smoking. If you operate the unit at "startup" setting, you will carbonize
the ribbon.
CAUTION
Never operate the equipment for a prolonged period of
time with the HEAT CONTROL in a position that causes
the sugar to smoke. This will result in excessive
carbonization of the ribbon (heat element). If you smell
burning sugar or see smoke, reduce the heat.
6.
Once you find the ideal setting for the HEAT CONTROL, operate with the setting near
this position each time.
When completing operation for the day (or any prolonged period), follow the instructions
in the Shutdown Procedure/Cleaning and Care section of this manual.
