P-60/60 Special Model No. 1866, 1866XJ, 2085, 2086, 2656, 2656KC
http://www.gmpopcorn.com
Page 4
OPERATING INSTRUCTIONS
CONTROLS AND THEIR FUNCTIONS
LIGHT AND WARMER SWITCH: Turns on the heat to the bottom corn pan and heat light.
KETTLE MOTOR SWITCH: Turns on the motor which drives the kettle agitator.
KETTLE HEAT SWITCH:
Supplies power to the thermostat controlled kettle
AUTO SHUT OFF
The
1866
and
2656
Models are equipped with an auto shut-off mechanism. If the kettle heat is on with no
product popping for fifteen minutes, the auto shut-off will turn off the kettle heat element and the kettle
heat switch will flash. To pop a new batch of corn, cycle the kettle heat switch off and then back on.
AMOUNT OF POPCORN AND OIL
Your new Popper is equipped with a 6 oz corn measuring cup (Part No. 49049).
Corn charge – 6 oz.
Oil charge – 1.6 to 2.0 oz.
Flavacol – 1 teaspoon
POPPING INSTRUCTIONS
1.
Turn
Kettle Heat
and
Kettle Motor
switch on.
2.
Make a test pop by putting 3 kernels of corn and 1 oz. (30 ml) of oil into the kettle.
3.
When the 3 kernels have popped, load the kettle with corn and oil charge.
4.
When corn has popped, dump the kettle.
5.
Repeat cycle starting with step number 3 above; always pop 3-5 batches for best popcorn.
Kettle Heat Switch
Part No. 42798 (1)
Kettle Motor Switch
Part No. 42532 (2)
Light And Warmer Switch
Part No. 42532 (2)
Switch Box Label
Part No. 48502 (1)
