OPERATING INSTRUCTIONS
Before plugging in and using your new Goldair
panel heater, check all surfaces to ensure the heater
is not damaged in any way.
Check that the On/Off switch is set to the Off position
before plugging the heater into the mains supply.
Pull the temperature sensor above the power switch
out as far as it will go (approx. 25mm).
Use the On/Off switch on the side of the heater to turn your heater on. The OF/ON indicator on the lower left corner
of the LCD screen will show the heater is in standby mode. The screen will also display the default temperature of
25
℃
. The ECO indicator will also be displayed showing that the heater is in the default setting for best economy. The
current ambient room temperature (RT) will also be displayed.
WARNING: Keep all objects at least 1 metre from the front and 300mm from the sides of the appliance.
WARNING: In order to avoid overheating or risk of fire, do not cover the heater.
WARNING: Never leave this appliance unattended when in use.
Your Goldair Panel Heater will provide background warmth. This Panel Heater is designed to take the chill off the
room.
The surface of this Panel Heater can be painted with good quality paint (acrylic or enamel).
Decorating tip: All wall mounted heaters may cause paint to discolour or wall paper to lift.
Always choose a safe location for the appliance, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the unit before use. This appliance
requires installation.
Operating your Appliance
Temperature Sensor
ON/OFF Switch
OF/ON indicator
And Timer indicator
Set temperature
Best economy setting
WiFi module operational
Temperature setting
Ambient room temperature
ON/OFF
Button
SET
Button
Adjustment
Buttons
Child Lock
Button
