Operating your Appliance continued
Press the ON/OFF button on the display panel once and the "ON" indicator will display on the LCD screen. The heater
is in the power-on state.
If the ambient temperature is below 25
℃
, the heater will heat.
If the ambient temperature is above 25
℃
, you will need to set the temperature to a higher temperature before the
heater will start to heat.
TEMPERATURE SETTING
•
Press the SET button and the temperature setting indicator flashes
•
Press or button to set your desired temperature.
•
Three seconds after the temperature setting is complete, the temperature will be automatically saved and the
heater starts to heat.
To find your preferred heat setting; Set the temperature to the maximum setting. When the room reaches the
temperature you want, check the ambient room temperature reading on the display and then set the heater to this
temperature setting. The heater will now cycle on and off to maintain this set temperature.
NOTE: the temperature is read from a thermostat in the heater, for a more accurate reading of the room
temperature, position a separate thermometer in another part of the room.
AUTO ON TIMER
The power switch on the side of the heater needs to be in the “ON” position.
The heater is displaying “OF” on the screen, press the “SET” button twice
and the “OF” indicator will change to "ON“ and flash slowly.
Press or button to set the number of hours (1-24 hours) before the
heater will turn on.
Three seconds after the power-on timer setting is complete, the power on
time will be saved and the heater will turn on after the time has elapsed.
AUTO OFF TIMER
The power switch on the side of the heater needs to be in the “ON” position.
Press the ON/OFF button.
When the heater is displaying “ON” on the screen, press the “SET” button
twice and the “ON” indicator will change to "OF“ and flash slowly.
Press or button to set the number of hours (1-24 hours) before the
heater will turn off.
Three seconds after the power-on timer setting is complete, the power off
time will be saved and the heater will turn off after the time has elapsed.
CHILD LOCK BUTTON
Press the child lock button on the display for 3 seconds, and the “Padlock Icon" on the LCD screen will be displayed.
The control panel buttons are now locked. To turn off the child lock, press the child lock button for 3 seconds again.
