Operating your Bathroom Scale
Place scale on a hard, flat surface for an
accurate and reliable result. Do not use on
carpet or rugs. Uneven surfaces may
affect readings.
FIRST TIME USE:
Remove insulation tape from battery
compartment.
TO WEIGH:
Tap the scale gently with your foot. Wait
for the
“0.0” to appear.
Step onto scale evenly and stand still. The
scale will automatically display weight in
KG, LB or ST.
AUTOMATIC SWITCH OFF:
The scale will switch off automatically after
8 seconds of idle time.
UNIT OF MEASURE SWITCH:
The scale is set to KG by default. To
switch to LB/ST, press the switch on the
back of the scale.
OVERLOAD INDICATOR:
If the scale is overloaded, the
“Err”
message will be displayed.
LOW BATTERY INDICATOR:
If the “Lo” message displays, the battery is
low. Replace the battery
– 1 x 3V CR2032
Lithium battery is required.
SUPPORT AND TECHNICAL ADVICE
PO Box 100707, NSMC, Auckland
Monday
– Friday 8am-5pm
Phone: 0800 232 633
Website: www.goldair.co.nz
