General Care and Safety Guide
Thank you for choosing this Goldair product. This Goldair appliance has been
designed and manufactured to high standards of engineering and with proper
use and care, as described in this leaflet, will give you years of useful service.
Please read these instructions carefully and keep them for future reference.
TECHNICAL SPECIFICATION
Model:
GCMF200
Supply:
220-240VAC 50Hz
Wattage:
85W
1.
Use only the voltage specified on the rating
plate of the appliance.
2.
Keep all objects at least 1 Metre from the front,
sides and rear of the appliance
3.
This appliance is intended for household use
only and not for commercial or industrial use.
4.
Use this appliance only as described in this
manual. Any other use is not recommended by
the manufacturer and may cause fire, electric
shock or injury.
5.
The common cause of overheating is deposits
of dust or fluff in the appliance. Ensure these
deposits are removed regularly by unplugging
the appliance and vacuum cleaning the air vents
and grills.
6.
Always unplug appliance when not in use.
7.
When the appliance has been unpacked, check
if for transport damage and ensure all parts
have been delivered. If parts are missing of the
appliance has been damaged, contact the CDB
Customer Services Team.
8.
If your appliance does not work, or is not
working properly, contact the place of purchase.
Repair work on the appliance by unqualified
persons can cause serious risk to the user.
9.
Ensure hands are dry before handling the plug
or the Fan.
10.
Carry out regular checks of the supply cord to
ensure no damage is evident.
11.
Children should be supervised to ensure that
they do not play with the appliance.
12.
Ensure that the cord is fully extended (not
coiled) while in use.
13.
Avoid contact with the moving parts. Keep
hands, hair, clothing, away from blade of the
Fan during operation to reduce the risk of injury
to person and/or damage to the Fan.
14.
Switch off and use handles provided when
moving.
15.
This appliance is not intended for use by
persons
(including
children)
with
reduced
physical, sensory or mental capabilities or lack
of experience and knowledge, unless they are
supervised or have been given instruction
concerning the use of the Fan by a person
responsible for their safety.
16.
Never place appliance close to radiant heat
source.
17.
Never operate in areas where petrol, paint or
other flammable liquids are used or stored.
18.
Never use the appliance to dry clothes.
19.
Never insert or allow foreign objects to enter any
ventilation or exhaust opening, as this may
cause an electric shock, fire or damage to the
appliance.
20.
Never use abrasive cleaning products on this
appliance. Clean with a damp cloth (not wet)
rinsed in hot soapy water only. Always remove
plug from the mains supply before cleaning.
21.
Never connect the appliance to mains supply
until completely assembled and adjusted.
22.
Never remove plug from power socket until the
appliance has been switched off.
23.
Never remove plug from power socket by pulling
cord
– always grip plug.
24.
Never twist, kink or wrap the cord around the
appliance, as this may cause the insulation to
weaken and split. Always ensure that all cord
has been removed from any cord storage area
and is unrolled before use.
25.
Never use this appliance in the immediate
surrounds of a bath, a shower, or a swimming
pool or other liquids. The appliance must not be
immersed in any liquids.
26.
Due to the risk of injury, never use this
appliance for any purpose other than its
intended use. This appliance is intended for use
in household and similar applications such as
staff kitchen areas in shops, offices and other
working environments; farm houses, by clients
in hotels, motels and other residential type
environments,
bed
and
breakfast
type
environments
27.
Never use this appliance outdoors.
28.
The use of an extension cord, power board, or
external timer is not recommended with this
unit.
29.
Never operate the appliance with a damaged
cord or plug, after it malfunctions, or if it has
been damaged in any manner. Have the
appliance checked and repaired by a qualified
electrician if repair is necessary. If the supply
cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
