Always choose a safe location for the Fan, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the unit before use. This appliance
requires no installation, it should be used solely as a portable appliance.
WARNING Keep all objects at least 1 metre
from the front, sides and rear of the
appliance.
IMPORTANT!
NEVER
COVER
THIS
APPLIANCE!
Fan control switch
The control switch positions are:
•
0 = OFF
•
1 = Low Speed
•
2 = Medium Speed
•
3 = High Speed
Place the fan on a dry, level and sturdy
surface.
Plug the power cord into the socket, making
sure the speed control is at OFF position.
To operate the fan, turn speed control dial
clockwise until desired wind speed is achieved.
To adjust the tilt angle, loosen both the larger
tilt adjustment knob and the smaller tilt range
knob, then tilt the head to the desired angle
and tighten both knobs.
To activate the oscillation function, push down
the oscillation pin on the top of the motor. The
fan will then oscillate until the pin is pulled
back up.
Operating your Fan
Oscillation pin
