Assembly
Remove the height adjustment knob (6) from
the outer tube (13). Slide the base cover (7)
over the outer tube (13) and replace the
height adjustment knob (6). Place the outer
tube onto the base and the base weight (20)
under the base; tighten with screw provided.
Assembly
Loosen the fastening screw (18) and slide
the assembled fan head onto the inner tube
(5). Once in place, tighten the fastening
screw (5) by rotating it clockwise.
Loosen and remove the retaining ring from
the front of the motor housing (15) by
rotating it anti-clockwise. Position the rear
grill (14) over the motor shaft, against the
motor housing, with the handle at the top.
Ensure that the locating pegs on the motor
housing are engaged correctly in the holes
on the grill. Screw the retaining ring onto the
motor housing by rotating clockwise and
tighten firmly.
Place the fan blade (1) onto the motor shaft,
locating the slot at the back of the blade.
Screw the retaining knob onto the motor
shaft by rotating it anti-clockwise and tighten
firmly.
Slide the grill hoop (10) over the rear grill
and then insert the front grill (9) into the
hoop. Position correctly by hand and secure
with small screw provided.
