•
Open securing clips around the front grill and loosen the grill screw at the bottom of the
front grill. Position the top clip on the uppermost part of the rear grill.
•
Push the top clip down and press rim of the front grill onto the rear grill.
•
Close all clips around them fit and tighten the safety screw.
•
Remove the rear grill retaining screw from the motor shaft.
•
Fit the rear grill by positioning it on the location pins. Secure the grill to the motor housing
with the rear grill retaining screw.
•
Push the fan blade onto the motor shaft by matching the slots on the base of the blade with
the shaft pin.
•
Secure the blade with the fan blade nut by turning it counter-clockwise.
•
Check that the fan blade rotates freely by turning it with your hand.
Assembly
Mounting to Wall
•
Select an appropriate location and fix the wall mounting bracket onto a strong wall (or locate
a stud behind plaster boards) with three wall plugs and fixing screws supplied.
•
Note: Consider a location within a distance of 0.8m from a wall power outlet to make sure
you can plug the unit into the power point easily.
•
Mount the wall fan on the mounting bracket and plug in the unit.
•
If the power cord is hanging loosely between the fan and the power outlet, make sure it will
not touch or obstruct fan blade rotation or fan oscillation in any way.
