background image

General Care and Safety Guide

Thank you for choosing a Goldair Towel Rail. This Goldair Towel Rail has been
designed and manufactured to high standards of engineering and with proper use and
care, as described in this leaflet, will give you years of useful service. Please read
these instructions carefully.

1.

This Towel Rail is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the Towel Rail by a person responsible for their safety.

2.

Children should be supervised to ensure that they do not play with the Towel Rail.

3.

In order to avoid a hazard, this Towel Rail must be installed so that the bottom rail is at least 600mm above the
floor.

4.

These towel rails must be located and installed in accordance with the AS/NZS 3000:2007 and any local
regulation information for mounting in damp areas.

5.

This Towel Rail is intended to warm and dry towels and therefore is hot to the touch.

6.

Any rise in ambient temperature is directly reflected in the Towel Rail, and as a result of this, the Towel Rail will
feel hotter to the touch during warmer periods. Also the insulation effect of towels will cause the operating
temperature to increase slightly.

7.

Means of disconnection must be incorporated in the fixed wiring in accordance with wiring guidelines AS/NZS
3000:2007.

8.

The towel rail is to be installed so that switches and other controls cannot be touched by a person in the bath or
shower.

9.

Do not use this towel rail for any purpose other than its intended use.

10. To avoid a hazard this towel rail must not be used to hold towels or any other articles that have been in contact

with oil, petroleum based products or dry cleaning fluids.

11. Use this Towel Rail only with the voltage specified on the rating label.
12. Do not immerse in liquid or allow liquid to run into the interior of the Towel Rail.
13. Indoor use only.

14. Do not operate this towel rail if damaged or after the Towel Rail malfunctions or has been dropped or damaged

in any manner. Return to a qualified electrical person for examination, electrical service or repair.

15. This Towel Rail is intended for household use only and not for commercial or industrial use.

16. Use this Towel Rail only as described in this manual. Any other use is not recommended by the manufacturer and

may cause fire, electrical shock or injury.

17. Do not use abrasive cleaning products on this Towel Rail. Clean with a damp cloth (not wet) rinsed in hot soapy

water only. Always switch off at the mains supply before cleaning.

18. Do not connect the Towel Rail to mains supply until completely assembled and adjusted.

19. Do not use this Towel Rail in a window as rain may cause electric shock.

20. Do not mount Towel Rail close to any other heat source.

21. Do not operate in areas where petrol, paint or other flammable liquids are used or stored.

22. Do not locate the Towel Rail directly below any power socket.

23. When the Towel Rail has been unpacked, check it for transport damage and ensure all parts have been delivered.

If parts are missing or the Towel Rail has been damaged, contact the Goldair Customer Services Team.

24. If your Towel Rail does not work, or is not working properly, contact the place of purchase or the Goldair

Customer Services Team. Repair work on the Towel Rail by unqualified persons can cause serious risk to the user.

25. There are no user serviceable parts installed in the unit.

26. Do not place the unit in wardrobes or other enclosed spaces as this may cause fire hazards.

27. This unit is not supposed to be used in or around locations where foodstuffs, works of art or delicate articles of

science, etc are stored.

Summary of Contents for GLTR5C















Reviews: