INSTRUCTIONS FOR USE CONTINUED
Motor thermostat
Important:
This motor is equipped with a motor protective thermostat. If for some reason the vacuum cleaner
should overheat, the thermostat will automatically turn the unit off. Should this occur turn power
switch off and unplug the vacuum cleaner from the wall outlet, change dust bag and clean filters.
Allow the unit to cool for approximately 1 hour. To restart, plug the vacuum into the wall outlet and
turn the vacuum cleaner back on.
Changing dust bag
1.) Open the cover by pressing the front cover release
2.) Remove the dirty dust bag by sliding out and replacing with a new one.
Removing & cleaning pre-motor and post-motor outlet filters
Warning:
Always unplug the unit from electrical outlet before removing the dust bag.
a.Pre-motor filter
1.) Open the cover by pressing the front cover release
2.) Remove the inlet filter grill and change filter.
1
2
1
2
Pre motor
filter grill
