14
FOR YOUR SAFETY READ BEFORE LIGHTING
WARNING:
IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTLY,
A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE,
PERSONAL INJURY OR LOSS OF LIFE.
A.
This appliance is equipped with an ignition device which automatically lights the
pilot. Do not light pilot by hand.
B.
BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell
next to the
because some gas is heavier than air and will settle on the
WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance
• Do not touch any electric switch:
• Do not use any phone in your building.
• Immediately call your gas supplier from a neighbor’s phone. Follow the gas
supplier’s instructions
C.
Do not use this appliance if any part has been under water. Immediately call a
service technician to inspect the appliance and to replace any part of
the gas control system which has been under water.
LIGHTING INSTRUCTIONS ELEC. SPARK TO PILOT
1.
“STOP” Read the safety information on
page 11.
2.
Set the switch to “OFF”.
3.
Remove batteries from battery pack.
4.
This appliance is equipped with an ignition
device which automatically lights the burner.
Do not try to light the burner by hand.
5.
Wait (5) minutes to clear out any gas. Then
smell for gas, including near the
If you
smell gas, STOP! Follow “B” in the safety
information on page 11. If you don’t smell
gas, go to next step.
6.
Install (2) D batteries in battery pack.
7.
Turn ON/OFF rocker switch to “ON”.
8. If the appliance will not operate, follow the
instructions “To turn Off Gas To Appliance”
and call your service technician or gas supplier.
NOTE: DAMPER CONTROL LEVER MUST
BE IN THE “OPEN” POSITION TO IGNITE.
GAS VALVE
f i r e - p a r t s . c o m
Summary of Contents for LFP4218
Page 16: ...16 fire parts com ...
Page 17: ...17 fire parts com ...
Page 19: ...19 Inc fire parts com ...