7
FIG-2.1
Cartons
FIG-2.2
C/No.
4. Place the Floor Panel on a smooth/flat surface and make sure which side is the front and which side is the back.
The front of the floor has
no
stain finish as the other three sides do.
See FIG 3.
FIG 3
Placing Floor Panel
FIG 4
Assembling Back Panel
4. Align the Back Panel by placing it up and onto the Floor Panel. It should sit up against the quarter round trim
molding on the Floor Panel. One person should hold the Back Panel while the other person continues to the next
step.
See FIG 4
5. Align the Right Side Panel by placing it up and onto the Floor Panel; make sure the Right Side Panel fits flush into
the Back Panel.
See FIG 5