19
PULSE/COUNTS MODE
The PULSE/COUNT feature allows operators to change the setting to PULSE which will re one pulse per number
displayed on the LCD. The output dose of the XR150 is 1 mR per pulse. The output dose of other Golden X-ray
models (Inspector Model 200, XR200, and XRS-3) is 3 mR per pulse. Due to the differences in output dose the
standard version of the XR150 software historically pulsed 3 times per COUNT entered on the LCD. The output
dose of the XR150 is 3 mR per COUNT (3 pulses) equaling to the same dose as other models. XR150 default
setting is COUNT.
Press ENTER to change modes
Select 3 Press ENTER to select Counts Mode
Select 1 Press ENTER to select Pulse Mode