USER
’S MANUAL
13
4 DTV MODE
4.1 System Initialization
When entering the system for the first time, you should do some initialization settings on the
system including OSD language, time zone, etc. See the figure below for the setting menu.
After setting, select the
Start Search
option and then press OK key to start auto scan. When
the scan completes, the scanned programs can be auto saved.
System Initialization
4.2 Entering the DVB System and Power On/Off
Entering the DVB system
After power on, the system will enter the DVB mode. If there is no program data in the
database, the following message will appear:
“Database Empty”.
Otherwise, the last program being played before the previous power off will be played. If
the system fails to play the program, please check the power connection and antenna
connection.
Power on
When the machine is in Standby mode, press POWER key to turn it on.
Power off
When the machine is running, pressing POWER key at any time can make it into the
Standby mode.
4.3 Volume Adjustment and Mute Control
Volume Adjustment
While in playing state without menu display, press LEFT/RIGHT keys to adjust the
volume. A volume bar will appear, which has 0~100 levels.
Mute Control
While in playing state without menu display,
press MUTE key to enter the mute state.
Pressing MUTE key again can exit the mute state.
