GM Electronics Ltd.
Golden Mask Deep Hunter Pro7
– Instruction Manual
11
outside the target area, press the
“SMART TUNE”
button and
then pass the antenna over the target from a different direction.
Repeat as many times as you want to identify the type of the
metal more securely. With a little experience, anyone can learn
to recognize the nature of the various signals, which will lead to
better use of the great capabilities of the Golden Mask Deep
Hunter Pro7.
8.Signal control
amplification (“GAIN”).
There are two positions
–
“
LOW
”
and
“HIGH”
.
“
LOW
”
is the
main one. The more amplification of the received signal is
provided in
“HIGH”
position and it will be increased the depth of
detection (about 20%). B
ut Its’ use is recommended only after
acquiring some experience in working with the unit, since
increased sensitivity could lead to increased number of ghost or
false signals.
Setting different values of the
“SENSITIVITY”
and using the
“GAIN”
switch can lead to different behavior of the device. You
will understand this function with practice and experience.
9.“Silent” Mode
In “Silent” mode the detector can be switched with the
"AUDIO
TONE
On
/Silent"
knob, when it is set to
"Silent"
. This mode
can be chosen at any time. In
“Silent”
mode the “ticking” sound
is not heard and the presence of metal target will be indicated
with a
high pitch tone for non-ferrous metals
, and
low pitch
tone for ferrous metals
. In the “Silent” mode the sensitivity is
lower,
but this mode is very suitable for highly “trashy" sites
(where some small, mainly iron metal objects are present, and
these objects are not an objective of the search). In
“Silent”
mode, the detector achieves a better “rejection” of junk metals
and provides a much more efficient search of large objects.
