GM Electronics Ltd.
Golden Mask Deep Hunter Pro7
– Instruction Manual
15
7.
If the indicator
“SIGNAL”
meter shows a negative value
(arrow deviates to the left of zero) after lifting the coil from the
ground, this means that a metallic object was located under the
coil. In such cases, move the coil to another location, turn on the
device again, press briefly the
“SMART TUNE”
button and start
the search.
8.
Switch-on the detector for about 15 minutes in the area of
search before starting to search for metal objects. During this
time the Golden Mask
Deep Hunter Pro7
electronics are self-
adjusting to the ambient temperature/humidity and the detector
reaches its optimum operating capabilities.
9.
Do not attempt to use the detector after the built-in battery is
discharged as this can result in damage to the battery and/or the
electronics.
10.
Always keep the electronics clean from dust, grease and
moisture. Use only dry and soft cotton cloth for cleaning.
11.
If you use the detector in areas where there is possibility of
the presence of buried weapons and/or explosives, you must
proceed with great caution. The manufacturer and the dealers
are not responsible for the any damage or injuries resulting from
such use of the detector.
12.
If you are looking for metal objects in areas where there
could be underground pipe or electrical lines, you must call the
relevant authorities responsible for the maintenance of these
lines for permission. Do not perform excavation without proper
permission. This is especially important in regions in and around
cities and industrial sites.
13.
The use of high-quality headphones (not included)
connected to the “PHONES” socket will help achieve better
results.
14.
The manufacturer and the dealers are not liable for trespass,
damages or injuries that could result from any use of the Golden
Mask
Deep Hunter Pro7
.