GM Electronics Ltd.
Golden Mask Deep Hunter Pro7
– Instruction Manual
9
If you do not have an assistant, “dragging” of the search “coil-
cable loop”, mounted on a non-metallic type “sled” frame (PVC,
for example) is recommended. The
“sled” must provide a
constant height (about 15 cm or more) of the frame from the
ground surface. The search should always begin with a brief
pressing of the
“SMART TUNE”
button (the same is
recommended to be carried out periodically during the search)
in order to maintain maximum stability and sensitivity.
The movement of the antenna should be carried out in parallel
bands that overlap by up to 30% in order to not miss any portion
of the search field. The speed of movement should be about 1
yard per second.
6.Search for metal objects with handle-mounted coils.
When the terrain does not allow searching with a “frame” coil,
Golden Mask
Deep Hunter Pro7
can be used with handle-
mounted round search coils. Search with such antennas does
not differ from the search with a “frame”. The round coils are
much more sensitive to identifying small objects and should be
used for such searches. In addition, the purpose of the handheld
coil is to replace the “frame” in inaccessible areas and provide
an opportunity for individual work, without an assistant. The
movement with handheld coils should be done
very slowly
.
Unlike traditional VLF metal detectors, using the principle of
inductive balance, the Golden Mask Deep
Hunter Pro7
can
detect metallic objects without motion. The movement is only
necessary to identify the type of metal, and a speed of about
1
m/s
is sufficient for the discrimination system to function
properly.
The search height above the ground surface with the round coils
antenna must be constant (about 10 cm or more).
If you hold the coil too low or touch the ground, you will
experience
faulty
signals.
All
activities
and
settings
