GM Electronics Ltd
.
Golden Mask Deep Hunter Pro AE
– Instruction manual
11
9.Rejection of small metal objects.
Often, in an area where large metal objects are searched for and
the metal detector is set to high level of
“SENSITIVITY”
control,
many (unwanted) small metal targets could be indicated.
Decreasing the
“SENSITIVITY”
control (sensitivity) and/or use of
“Silent”
mode sometimes could return acceptable results, but the
Golden Mask Deep Hunter Pro AE
provides the ability to
eliminate small metal objects without reducing the sensitivity. This
is accomplished with the
“REJECT”
knob. The lower the value
selected with this knob, smaller metal objects are detected. After
doing some tests with multiple "samples" of different metallic
objects, you will learn which values of the
“REJECT”
settings are
best for your needs.
10.Charging the battery:
To ensure longer life of the battery it
must be charged with only the supplied charger.
To charge the battery:
1
. Turn
“Off”
the detector, remove the coil jack and plug the
charger jack into the connector labeled
“CHARGE”
on the front
panel of the electronic block.
2
. Place the detector in near a power outlet with voltage 120-
240V and connect the automatic charger into the outlet.
The charging is indicated with a
RED-color
LED light on the
charger housing. When the charging process is completed, the
same LED turns
BLUE-color
light.
The duration of charge of fully discharged battery is about 8 -
12 hours.
Summary of Contents for DEEP HUNTER Pro AE
Page 1: ...Instruction manual ...
